![]() ![]() We now need to stop my Windows 7 PC from getting it's IP address from the DLink router via DHCP and set the IP address of the Windows 7 PC to a specific, fixed IP address, because we are going to run a DHCP server (tftpd32) on the PC itself.Ĭlick Close and then click on the Properties (see Fig. Note that it says 'DHCP Enabled Yes' which means that it expects a DHCP server to be on the network (in this case my DLink router). IPv4 DNS Server 192.168.1.1 (my DLink router is the internet DNS server too) IPv4 DHCP Server 192.168.1.1 (my DLink router is the DHCP server) IPv4 Default Gateway 192.168.1.1 (my DLink router's IP address) IPv4 Address 192.168.1.2 in my case - this is the IP address of the PC (given to it by the Dlink router) Make a note of the following (on that piece of paper that you have ready - right?): In Windows 7, go to Control Panel - Network and Sharing Center - Local Area Connection The first thing to do is note down your current settings. The main issue you may have is with the router when you enable or disable DHCP - so back up the router configuration (most routers have a 'save config to file' option)!ġ. Changing Windows 7 network settings and then changing them back again is easy and works well. These instructions could potentially screw up your network and internet access. If it does not work (check for a link light on the Ethernet port) then you will have to use a hub or router. If you are reluctant to change your router settings, simply unplug it and connect the cable straight to your target PXE-boot system. Note: many modern systems will work if you directly connect the two Ethernet ports (computer computer) together using an ordinary Ethernet cable, without the need for a hub/router or cross-over Enet cable. Lastly, save your current router settings to a file on your PC - no REALLY! I really mean it - do it now! Then try to re-load the saved settings file to make sure it works.Get a piece of paper and a pen to make a note of your current settings as you go along - no REALLY! Get some paper and a pen NOW! You haven't done it have you? Look, you may have a fantastic memory, but if you lose network connectivity and internet connectivity and can't get it working again, don't blame me just because you couldn't be bothered!.BT or Virgin or TalkTalk or whoever) - if you have to reset your router, you will need to put these details in again! ![]() Ensure you know your routers username & password and how to set up the ADSL credentials which were originally given to you by your ISP (e.g. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |